Table of Contents
Advertisement
IP Frames Conversion Screen
To open this screen do the following:
1. Starting from the main menu, select Configuration
2. You will be prompted for a port number. Token-Ring ports are 1-20, Fast
Ethernet ports are 21, 22, 25, or 26. When you have entered the port number, the
Port Configuration screen for that port will be displayed.
3. On the Port Configuration screen, select Virtual Port Configuration ...
4. On the Virtual Port Configuration screen, select Frame Conversion
Configuration... The Frame Conversion Configuration screen appears.
Select IP Conversion Parameters Change ...
IP Frames Conversion
Sets the state of the IP frames Conversion. Possible values are Enabled and
Disabled . If the state is set to Disabled, IP traffic will be dropped.
Default: Enabled .
IP: Token-Ring Format
Sets the format of IP frames on Token-Ring. Available formats:
•
802.5 SNAP
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
Frame in the IEEE 802.5 format with SNAP
→
Port Configuration.
Switch Configuration
83
Advertisement
Table of Contents
