Table of Contents
Advertisement
75
Priority Threshold
The highest Token-Ring frame priority that will go to the low priority transmit
queue. Possible values are 0 – 7 . The default value is 3 ).
Min Transmit Priority
The minimum Token-Ring frame priority that will be used for transmits. Possible
values are 0 – 6 . The default value is 4 .
Error High Threshold
This field is only valid when Forwarding Mode is set to auto , and is used to force
a port to store & forward mode when the percentage of errors detected in the
Sampling Interval is more than the error high threshold. Possible values are 0 – 100
percent. The default value is 10 percent.
Error Low Threshold
This field is only valid when Forwarding Mode is set to auto , and is used to return
a port to cut-through mode when the percentage of errors detected in the Sampling
Interval is less than the error low threshold. Possible values are 0 – 100 percent. The
default value is 1 percent.
Error Sampling Interval
This field is only valid when Forwarding Mode is set to auto , and specifies a
sampling period in minutes. The sampling period is used when counting errors to
determine a ports forwarding mode. Possible values are 1 – 60 minutes. The default
value is 10 .
Cfg Loss Threshold
Configuration loss occurs when a port completes a connection, allows data traffic
to flow, and subsequently closes. This threshold is used to control the number of
configuration losses that can occur within the Cfg Loss Sampling Interval . When
the threshold is exceeded, the port is disabled and must be enabled via this screen
or an SNMP manager. Possible values are 1 – 100. The default value is 8 .
Cfg Loss Sampling Interval
Specifies a sampling period in minutes. The number of configuration losses occurring
within this interval is compare to the Cfg Loss Threshold to determine if a port
should be disabled. Possible values are 1 – 60 minutes. The default value is 10 .
Note: If you change any configuration parameters of a connected port, the port will
close and reopen and you will lose all address information and statistics for that
port.
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
Switch Configuration
Advertisement
Table of Contents
