Table of Contents
Advertisement
Console/Telnet Sessions
The following section describes how to establish a console or Telnet session.
Console Configuration Menu
This menu lists items for configuring console and Telnet sessions. The Serial Link
Configuration (console) and Telnet Configuration items are selected by
highlighting and pressing
To open this menu from the main menu, select Configuration
Configuration .
Serial Link Configuration...
An example of this screen and an explanation of its contents follows below.
Telnet Configuration...
An example of this screen and an explanation of its contents follows below.
Console Timeout
A value that can be set to determine when the console session will timeout and
return to the greeting menu. If the value is set to zero, the console will never time
out. Default is 5 minutes.
Note: You cannot select Serial Link Configuration... if you are accessing the
configuration program via Telnet.
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
.
ENTER
117
→
Console
Switch Configuration
Advertisement
Table of Contents
