Table of Contents
Advertisement
189
Trap Receivers Screen
→
To open this screen from the main menu, select Configuration
SNMP
→
Configuration
Trap Receivers.
Trap receiver tables tell the switch where to send traps. The table contains the IP
address associated with an SNMP manager.
The Trap receiver table contains a maximum of 20 entries. It is redisplayed each
time the table changes.
Trap receiver table entries are saved when you select Return . Entries are preserved
across resets and power cycles.
Index
Sequential number of entries in the table.
IP Address
The IP address associated with an SNMP manager.
Community Name
The name used to identify SNMP managers.
TrBRF
TrBRF VLAN name for which traps are sent to the specified SNMP manager.
More
Used to view next page of table.
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
Monitoring the Network with SNMP
Advertisement
Table of Contents
