Table of Contents
Advertisement
Download/Upload Menu
As enhancements are made to the switch, you may need to update the software, or
microcode, that is contained in the switch. This chapter describes how to upgrade
the switch flash memory.
Caution: After downloading the new software, you must reset the switch. The
switch is not operational while it is resetting. Before starting this procedure, make
sure the network will not be effected.
Downloading is used to load the flash memory within the switch. The Download/
Upload menu displays two download choices. The two choices are TFTP (Trivial
File Transfer Protocol) Download/Upload and the Serial Link Download
(console). You can also use TFTP transfers to store or retrieve the complete set of
switch configuration parameters.
To open this menu, select Download/Upload in the main menu.
Serial Link Download...
Displays the Serial Link Download screen.
TFTP Download/Upload...
Displays the TFTP Download/Upload screen.
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
125
Switch Configuration
Advertisement
Table of Contents
