Table of Contents
Advertisement
NetBios Conversion Configuration Screen
To open this screen do the following:
1. Starting from the main menu, select Configuration
2. You will be prompted for a port number. Token-Ring ports are 1-20, Fast
Ethernet ports are 21, 22, 25, or 26. When you have entered the port number, the
Port Configuration screen for that port will be displayed.
3. On the Port Configuration screen, select Virtual Port Configuration ...
4. On the Virtual Port Configuration screen, select Frame Conversion
Configuration... The Frame Conversion Configuration screen appears.
Select NetBios Conversion Parameters Change...
NetBios Frames Conversion
Determines how NetBios frames are converted. Possible values are Enabled and
Disabled . If the state is set to Disabled , NetBios traffic will be dropped.
Default: Enabled
NetBios: Token-Ring Format
Sets the format of NetBios frames on Token-Ring. Available formats:
•
802.5
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
Frame in the IEEE 802.5 format
→
Port Configuration.
Switch Configuration
87
Advertisement
Table of Contents
