•
Address filters. Domains have no effect on address filters. For example,
suppose you create two domains: one containing ports 1–8 and the other ports
9–16. If you add an address filter to ports 7, 8, 9, and 10, the filter will work
properly even though it applies to ports in other domains.
•
CrossLink. All the Token-Ring ports in a single CrossLink must belong to the
same CRF. Therefore, the console software prevents you from defining a
CrossLink connection that includes ports in different CRFs. It also prevents
you from assigning the Token-Ring ports in an existing CrossLink to different
CRFs.
VLAN Configuration Menu
To open this screen from the main menu, select Configuration
Configuration.
See the section "VLAN Support" on page 35 for a discussion of VLANs.
Information on the various submenus follows in the next two subsections.
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
53
→
VLAN
Switch Configuration