Table of Contents
Advertisement
104
Protocol Filters...
Displays the Protocol Filters menu.
Configure Filters Screen
To open this screen from the main menu, select Configuration
Security. Then select Configure Filters....
When you select Add Entry on this screen, a list is displayed of the available filter
functions with a selectable highlight. After a choice is made, the console prompts
you for the necessary parameters.
Index
The number index.
MAC Address
MAC address contained in packets to be filtered. See a detailed description of MAC
addresses on page 46.
Type
Possible types are listed below:
•
Block any packet with Source Address—Block Src
— That is, any packet from that specific address is blocked from entering the
specified port(s).
•
Block any packet with Destination Address—Block Dest
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
→
Filters & Port
Switch Configuration
Advertisement
Table of Contents
