Table of Contents
Advertisement
Novell Conversion Configuration Screen
To open this screen do the following:
1. Starting from the main menu, select Configuration
2. You will be prompted for a port number. Token-Ring ports are 1-20, Fast
Ethernet ports are 21, 22, 25, or 26. When you have entered the port number, the
Port Configuration screen for that port will be displayed.
3. On the Port Configuration screen, select Virtual Port Configuration ...
4. On the Virtual Port Configuration screen, select Frame Conversion
Configuration... . The Frame Conversion Configuration screen appears.
Select Novell Conversion Parameters Change ...
NOVELL Frames Conversion
Determines how Novell frames are converted. Possible values are Enabled and
Disabled . If the state is set to Disabled Novell traffic will be dropped.
Default: Enabled
NOVELL: Token-Ring Format
Sets the format of Novell frames on Token-Ring. Available formats:
•
802.5 SNAP
•
802.5
Default: 802.5
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
Frame in the IEEE 802.5 format with SNAP
Novell naming convention: Token-Ring SNAP
Frame in the IEEE 802.5 format without SNAP
Novell naming convention: Token-Ring
→
Port Configuration.
Switch Configuration
85
Advertisement
Table of Contents
