Table of Contents
Advertisement
118
Serial Link Configuration Screen
Use the Serial Link Configuration screen to configure a switch when using a
modem to create a console session.
To open this screen from the main menu, select Configuration
Configuration . Then select Serial Link Configuration .
Hardware Flow Control
Enables or disables RTS/CTS handshaking.
Default: Disabled
Software Flow Control
Enables the XON and XOFF characters, which are 11 and 13 hexadecimal, respectively.
Default: Disabled
Autobaud Upon Break
Indicates whether the baud rate is reset when a Break key sequence (pressing
rapidly for five seconds) is sent or received. The default is Disabled . When
ENTER
set to enabled, a baud rate change can be accomplished by changing the baud rate
of the terminal emulator, disconnecting and reconnecting the TIA/EIA-232 cable,
and then pressing
Console Baud Rate
The baud rate of the TIA/EIA-232 port. Acceptable baud rates for the console are
1200 , 2400 , 4800 , 9600 , 19200 , 38400 , 57600 , or Autobaud . The default value for
CrossFire 8730 Switch Reference Guide, DOC-7047 v. 1.1
until a screen appears.
ENTER
→
Console
Switch Configuration
Advertisement
Table of Contents
