Alarm Server Setting; System Setting Page; Device Information Checking - Wansview NCH--530W User Manual

http://www.wansview.com

5.4.5 Alarm Server Setting

Please confirm if you have connected to alarm server. The alarm message format as follow:
GET /api/alarm.asp？
username=username&
userpwd=password&
rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port, 3 =Other Type)&
io=0
Alarm server need develop by customer; user can extend other functions on this server, like
SMS, MMS alarm etc.

5.5 System Setting Page

5.5.1 Device Information Checking

Device ID is set by factory. Every ID is unique
Figure 26
Figure 27
19