If the blue light of the equipment is blink, means camera already connect to Internet successfully. Make sure the internet connection is OK. Network connection Figure 1 First time Use At first, run program on the CD, then it will install software .Open the program on your PC ( picture 2). http:// www.wansview.com...
Page 3
Step 3: View the Camera : choose the camera you want to view , then Click the right mouse, select ”open video “ or double click camera to view ,it will show the windows as figure 3 . http:// www.wansview.com...
Step 3 : Choose the camera you want to setting Step 4: Click “Device Properties” Step 5: Windows will pop up ask for the user name and password, default use name is admin, password is 123456. Then click Ok . Picture 4 http:// www.wansview.com...
Fill in the WIFI encryption password; Click “Apply” to save your settings; Click” Ok” to exit the setup screen Picture 5 Note: After success finish wireless settings, unplug the power and plug again to restart the camera, the wireless function will take effective. http:// www.wansview.com...
Page 6
& & IPhone Visit Please go to App Store Search for wansview Then choose wansview-plug&play Choose the software to install. Click “Install”. Input your Apple ID password . Waiting for software install. After finish , you can open the software Input the user name and password, then log in , you can view the camera by your Iphone .
Page 7
Camera will automatically restore to factory setting after start, the start time is around 2 minutes Do not disconnect the camera during this time, or the above operation will in-effect or user must repeat the above process again. http:// www.wansview.com...