Trigger Alarm; Play Automatically After Launching The Software; Default Record Plan - Wansview ForISmartViewPro Operation Manual

Figure 11

7.1.1. Trigger alarm

It supports snapshot, alarm recording and alarm voice prompt
Tips: You need to set up motion detection and the trigger alarm of camera website, so it
will be performed trigger alarm.

7.1.2. Play automatically after launching the software

Ticked "Play automatically after reboot", it will connect automatically and play the cameras
in device list after reboot the software.

7.1.3. Default Record Plan

You need to create recording plan to set up it when you use local record plan; record
status indicate as record manually, record plan, shown as Figure 12.
Figure 12
Tips: You need to select record property when creating record plan, consider if cover the
recording or stop recording after the space is full, shown as Figure 13