Motion Detection Setting; Alarm Mode Setting - Wansview NCM620W User Manual

http://www.wansview.com

3.3.2. Motion Detection Setting

Click SYSTEM SET->>ALARM->>Motion Detection to access setting interface as figure 18,
you can set up detect window here, tick a window, the corresponding green frame of motion
detection window is displayed, you can tick four windows maximum for motion detection area
as below.
Figure 18
Please click "apply" after finishing the settings, and motion detection takes effect. The
higher value, the higher sensitivity. The camera will trigger corresponding alarm when
any change occurs in the detection area.

3.3.3. Alarm mode setting

After camera detects any change, it will alarm as several mode, example of figure 18.
20