Alarm Setting - Wansview W1 User Manual

3.4.3 Alarm Setting

Alarm Deployment
IO Detection：Sensor type can choose Always open or Always close. When using IO Check, user should enable IO detection,
Always open means external alarm device is needed, and only with alarm trigger, alarm will be valid. If choose Always close, the
camera will be alarm continuously per 30 second.
Motion Detection: Sensitivity can choose Low/ Middle/ High according to needs.
Voice Detection: Sensitivity can choose Low/ Middle/ High according to needs.
Temperature detection: the temperature range can be set from
"<"means the temperature below the set value, the camera will send alarm notification.
">"Means the temperature above the set value, the camera will send alarm notification.
Humidity detection: the humidity range can be set from 0% to 100%.
"<"means the humidity below the set value, the camera will send alarm notification.
">"Means the humidity above the set value, the camera will send alarm notification.
Trigger Alone : The alarm will be triggered for any kind of alarm condition.
Trigger Linkage: If set two or more kinds of alarm methods, only met all alarm conditions, the alarm can be triggered.
Alarm Action:
Support Email/ Skype: service2@wansview.com
Enter SD/TF Record Playback, record
file will be automatically displayed.
User can also search needed files by
clicking
check schedule or alarm record on an
exact date.
Notice：The date in red means there are
recorded files on that day.
Access to "Alarm Setting", there are
options for Alarm Deployment and
Alarm action.
You can use a motion detector to
improve the detection rate of your
camera. Simply connect the sensor to
the alarm input and activate the
external input. An alarm will be
triggered once the circuit is broken by
replay inside the detector or if the wire
is disconnected. The state you have to
choose depends on your sensor(the
wrong choice will give a continuous
alert once the detector is connected).
-100℃ to 100℃.( not for this camera)
( not for this camera)
icon to enter calendar to
17