Ftp Service Setting; Alarm Server - Wansview NC543 User Manual

http://www.wansview.com

7.2.3 FTP Service Setting

When alarming, device will snap and send the image to FTP server, please make sure
the FTP setting is correct. Above Figure 17 of FTP setting for your reference, click setting
to store the setting info and click test to check the setting.
After correct setting FTP server, you can use "upload Image Periodically" function. Even
no alarm, device can also send the snap image to FTP periodically.
In order to use FTP function, user should apply username and password on
the FTP server first. And please apply some storage, and the authority to write
and create sub-category into it.

7.2.4 Alarm Server

Please confirm if you have connected to alarm server. The alarm message format as
follow:
GET /api/alarm.asp？
username=username&
userpwd=password&
rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port)&
io=0
Alarm server need develop by customer , user can extend other functions on this server ,
like SMS , MMS alarm , and mobile phone etc .
Figure 17
Figure 18
17