Ftp Setting; Alarm Server Setting; Ptz Setting - Wansview NCH-532MW User Manual

http://www.wansview.com

5.4.4 FTP Setting

In order to use FTP function, user should apply username and password on the FTP server
first. And please apply some storage, and the authority to write and create sub-category into
it.

5.4.5 Alarm Server Setting

Please confirm if you have connected to alarm server. The alarm message format as follow:
GET /api/alarm.asp？
username=username&
userpwd=password&
rea=alarm type (1=Motion Detection, 2 =Alarm from Alarm in port, 3 =Other Type)&
io=0
Alarm server need develop by customer; user can extend other functions on this server, like
SMS, MMS alarm etc.

5.4.6 PTZ Setting

Before buying the PTZ, please check this device supporting which PTZ protocol. Read the
manual of PTZ, and set PTZ address, baud rate, data bit, stop bit
Figure 25
Figure 26
19