Related Manuals for Wansview K2
Summary of Contents for Wansview K2
- Page 1 Wansview Full HD 720P IP Camera K2 User Manual Revised 2 December, 2016 www.wansview.com...
-
Page 2: Table Of Contents
1.3 Uses......................................7 1.4 Specifications....................................7 1.5 System Requirements.................................. 8 2. Camera Management with Smartphones/Tablets...........................8 2.1 Wansview App for iOS and Android............................9 2.2 Live Streaming...................................10 2.3 Local Picture and Record................................12 2.4 SD/Micro SD Card Record and Playback（Not support）.......................13 2.5 Alarm Setting..................................... 13 2.6 Advanced Settings..................................15... - Page 3 6.4.4 Video Library.................................. 52 6.4.5 Camera Log..................................52 7. FAQ........................................53 7.1 Compatibility Setting for Internet Explorer..........................53 7.2 Plugin Issues....................................53 7.3 Install IE Tab for Chrome 43..............................54 7.4 Install IE Tab for Firefox 42..............................55 7.5 Port Forwarding..................................56 8. Warranty.......................................59 www.wansview.com...
-
Page 4: Welcome
Or scanning the QR code to enter our Youtube channel. Important Security Warning In order to keep your Wansview camera secure and prevent unauthorized access, please make sure to follow the steps below: 1. The camera has always the latest firmware installed. If we update the firmware, we upload it on www.wansview.com/Service/download/... - Page 5 Contact us if anything is broken or missing in the package. 8. Battery Drainage and Data Consumption Please remember to exit the app after use, to prevent battery drainage and data consumption. 9. Compliance FCC, CE, ROHS www.wansview.com...
-
Page 6: Features And Specifications
The Wansview HD IP Camera is an integrated indoor IP Camera developed specifically for network video applications. 1.1 Product Profile The Wansview HD IP Camera comes with 4 PCS IR LED , a CMOS Sensor, and built-in Microphone with 120 degree viewing angle. Front View/ Rear View... -
Page 7: Features
Real plug and play, easy set up in 5 minutes One key WiFi configuration via mobile app 1.3 Uses Home Security Business Security Entryway Monitoring Baby Monitoring Pet Monitoring Elderly Parents 1.4 Specifications www.wansview.com... -
Page 8: System Requirements
IR Leds and open the outdoor lights. The Wansview Camera is a P2P camera as long as the camera is connected to the internet. Users can view the camera from smartphones/tablets or PC, wherever they are using cellular data or Wi-Fi connections. -
Page 9: Wansview App For Ios And Android
Please get in touch with our friendly customer service for any advice. 2.1 Wansview App for iOS and Android Go to the App Store and install the “Wansview” app. Connect the camera to the power source with the provided adapter. Users can connect cameras by Ethernet RJ-45 cables or through Wi-Fi network. -
Page 10: Live Streaming
Viewing Camera on a Single Window a) Tap cameras to view videos streamed by added cameras b) Tap the monitoring screen to see the video menu. c) Digital Zoom is available on the screen by enlarging fingers (4X digital zoom). www.wansview.com... - Page 11 Click on cameras on the list to add the view on the main screen. 2. Tap to hide cameras’ list 3. Tap to exit multiple windows mode 4. Press to play camera. Tap again to stop the video. www.wansview.com...
-
Page 12: Local Picture And Record
To stop recording, tap again or exit from the live streaming. In Local Picture and Record users can find all the pictures and videos taken. Share pictures and records To share pictures and records follow the steps indicated in the screenshots. Save records to phone and delete records www.wansview.com... -
Page 13: Sd/Micro Sd Card Record And Playback（Not Support
The IP Camera begins recording when it detects movement/audio and stops recording in 30 sec. In this section, users can customize the motion detection feature. This feature can be set on the app or in the web interface. Motion is detected by changes in the pixels of the images. www.wansview.com... - Page 14 “<” means the humidity below the set value, the camera will send alarm notification. “>” means the humidity above the set value, the camera will send alarm notification. Attention: K2 has no such function in temperature and humidity detection. Alarm trigger type Trigger alone: The alarm will be triggered for any kind of active alarm event (Motion/ Voice/IO).
-
Page 15: Advanced Settings
Speaker Linkage: When an alarm is detected the speaker will act as a siren for the chosen length (5-30sec). Time Deployment Users can set time and day of the week where the alarm function is active. 2.6 Advanced Settings www.wansview.com... -
Page 16: Wi-Fi Setting
In User Management, users can set 3 level of access to the camera: Administrator: Full access rights Operator: Can operate the camera, but not access to advanced settings Viewer: Only can view camera. No Pictures or Recordings. Note: password shall be no longer than 20 characters www.wansview.com... -
Page 17: Time Setting
Click "Time Setting" to set time and time zone. 2.6.4 SD/TF Card Setting(Not support in this model) Click "SD/TF Card Setting" to check the SD card capacity and status. A 64Gb SD card can store videos continuously up to 3 days. www.wansview.com... -
Page 18: Sd/Tf Setting（Not Support
2: 640x360 pixels 3: 320x180 pixels 2.6.5 OSD (On Screen Display) Setting Click "OSD Setting" to set: Overlay time: camera time in live streaming, recording and pictures Overlay name: camera name in live streaming, recording and pictures 2.6.6 Reboot camera www.wansview.com... -
Page 19: Reboot Camera
There is a CD included when you buy the camera, please insert it into the CD driver of your PC to install the search tool SearchPro to your PC. If your PC doesn’t have a CD driver or the CD can’t be read, please go to our official website www.wansview.com/service to download it. -
Page 20: Settings
3.1.1 Network Installation 1: Please install and start the SearchPro tool 2: The camera tool will automatically find all Wansview IP Cameras in your network and will show their IP address. 3: If your camera doesn’t find your IP address right away, please wait 10-15 seconds for your routers DHCP service to assign an IP address to your camera. -
Page 21: Live Streaming And Recording On Pc
In the Flash Player mode, users have less functions. Microsoft Edge is not supported. 3.2 Live Streaming and Recording on PC Menu Bar Video Menu Bar Pan/Tilt Control Set Preset Play/ Stop: Play and stop video. www.wansview.com... -
Page 22: Playback Video
Click "Playback Video" to enter the SD card video file playback page. Click the video date to inquire. Click "Search" to list the video files of the selected day. Click listed files to play back. Download files on PC with the download button. www.wansview.com... - Page 23 www.wansview.com...
-
Page 24: Set Up
Data about the current Camera Status. Check the Internet IP address by double tapping Internet IP address System > Time Setting Users can choose to sync time to the PC or to a NTP server. System > Pan & Tilt www.wansview.com... - Page 25 System > Other Settings Turn off Led indicators at your choice. System > Multiple Settings Add up Cameras for multiple 4 view. Get their IP and Port, Input User and Password. Name them. www.wansview.com...
-
Page 26: Network
In System Maintenance users can reboot/restore to default / backup/upgrade camera. System > About In System About users can check the latest camera’s firmware which can be downloaded at www.wansview.com. 3.4.2 Network These functions are meant to be managed by technical specialist except for FTP Server Settings and SMTP Settings. - Page 27 -Secondary DNS(IP address of your router; for example192.168.x.1) Network > Port setting At "Port Setting", users can change web access port (http port). Port setting range: 80-65535. Pay attention not to conflict with other port values. Network > Wi-Fi setting www.wansview.com...
- Page 28 If the user wants to view the camera through the internet, the router and camera UPNP port forwarding function need to be turned on. Before auto port mapping, please ensure your router supports UPNP and has been enabled. Network > DDNS setting www.wansview.com...
- Page 29 VLC. Access links are as shown below: The first bit stream: rtsp://user: password @IP:rtsp port /live/ch0 The second bit stream: rtsp://user: password @IP:rtsp port /live/ ch1 The third bit stream: rtsp://user: password @IP:rtsp port /live/ ch2 Network > Onvif setting www.wansview.com...
- Page 30 Note: If you want to save the alarm picture and video to FTP, you must build an FTP sever, then create an FTP account with a password (not an anonymous account) on your FTP server and FTP account must have create and delete file rights. Network >SMTP (E-mail) Setting www.wansview.com...
-
Page 31: Video And Audio
Mail subject: This field allows the user to define the subject line of the email. Mail content: This field allows the user to define the mail content. 3.4.3 Video and Audio Video and Audio > Video www.wansview.com... - Page 32 Users can set the exact AC Frequency. Bit stream settings include: Resolution （1920*1080 or 1280*720） , Bit rate (256~4096kbps), Frame rate (1~30fps) Video and Audio > Audio Setting Here you can adjust Microphone and Speaker volume Video and Audio > Image Setting www.wansview.com...
-
Page 33: Security
To modify /add /delete administrator operator and viewer can be set in this page. (add up to 8 viewers and set rights in total). Reminder: After the operation, click Save. Then click Refresh so that the edited content will be displayed on the web page. www.wansview.com... - Page 34 Below is a Screen shot of the IP Filtering screen. Security > Mask Area (not available for MAC users) Users exclude up to 4 areas from monitoring. Click Start Setting and check the windows. www.wansview.com...
-
Page 35: Alarm - Motion And Audio Detection
Motion is detected by changes in the pixels of the images. Please note that motion detection doesn’t work through windows. In this case we recommend to connect an external motion sensor out of the window using the IO alarm port. www.wansview.com... - Page 36 FTP server. Snapshot to SD/TF: When an alarm is detected, the camera will send 2 pictures to the SD card. Recording to SD/TF: When an alarm is detected, the camera will send a 30 sec video to www.wansview.com...
-
Page 37: Storage
Trigger jointly: The alarm will be triggered for multiple detection at the same time (Motion/ Voice/IO). Alarm > Armed Time By default alarm is armed 24h/7 days. Users can choose specific days and time ranges. 3.4.6 Storage SD Card Management(Not support in this model) www.wansview.com... - Page 38 Storage > SD card Capture (Timed Snapshots)(Not support in this model) Take Timed snapshots and save them on the SD card Storage > SD Card Scheduled Recording(Not support in this model) www.wansview.com...
-
Page 39: Log
Reminder: The system default is automatic overwriting for the SD card video. If the storage space is full, the new video will automatically overwrite the earliest video file. 3.4.7 Log Log > Local Configuration (not available for MAC users) www.wansview.com... -
Page 40: Manage Camera With Other Apps And Software
3. In the URL field type: rtsp://user:password@IP:port/live/ch0 or ch1 or ch2 4. RTSP Mode: select TCP 5. Test 6. Click OK 7. In the following mask, click finish 8. The camera is online User: your user Password: your password IP: your camera’s IP (get it from the app) www.wansview.com... - Page 41 Click next Input User and Password Follow the wizard Add Camera by RSTP In camera setup, choose: Camera Type: network IP Camera Manufacturer: Wansview Click Next Select Camera Type: other IP camera Protocol: RSTP IP address: RSTP port: 554 Stream Path: live/ch0 Input user and password Click Next.
-
Page 42: Windows Pc Software Access
Screen resolution: ≥1024*768 5.3 iSmartViewPro Installation Access iSmartViewPro installation software: Access the installation software from the camera disk or official website of our company http://www.wansview.com/Service Please create a desktop shortcut when you install iSmartViewPro Desktop shortcut icon 5.4 iSmartViewPro Operation 5.4.1 CMS Interface... -
Page 43: Access To Camera
D: Camera operation log E: Search System language switching and other function settings 5.4.2 Access to camera 5 .4.2.1 Add Camera Click icon to add camera. User can Add device manually or Search to Add. a. Search to Add www.wansview.com... -
Page 44: Edit/Delete Device
X series. 5.4.2.2 Edit / Delete Device Edit Device icon Delete Device icon Select a camera in device list and click "Edit Device" or "Delete Device" to manage device. 5.5 Play Video Double-click the device name to play video. www.wansview.com... - Page 45 Mirror or Flip if the video is upside down. Click to pan and tilt the camera by click Up/Down/Left/Right arrow. Select the camera and right click the camera name, then more operation options will be appear. 5.6 System Settings www.wansview.com...
-
Page 46: System Setting
User needs to create scheduled video when required to use local video scheduling to set the scheduled video; video status display (divided into two types: manual video display status and scheduled video display status); Create a default record plan www.wansview.com... -
Page 47: Local Menu Bar
Play /close all devices in device list View Camera on Multiple windows Playback and Query Recorded video Open the video playback player so that you can directly access corresponding video files of each camera according to the video path. Please refer to the figure below. www.wansview.com... -
Page 48: Mac Software Access
Supports SmartP2P smart cloud platform camera; Supports multinational language switching; Supports local video; Supports local video playback; Supports image settings; 6.2 Operational Requirements For stable operation of iSmartViewPro, the following minimum system parameters are suggested: www.wansview.com... -
Page 49: Ismartviewpro Installation
Access iSmartViewPro 2.0 installation software: You can download the software from the CD or official website of our company www.wansview.com/service Double click to open the dmg file. Drag iSmartViewPro 2.0 to copy it to the computer according to the direction of the arrow. - Page 50 Icon: Show camera list by Icon List: Show camera list by List. Click to enter Add Camera. Cameras can be added manually or Lan Search Delete Select a specified camera. Click to delete the camera from the list. Device Edit www.wansview.com...
- Page 51 To check relevant information of the camera User Setting To modify user name and password of the administrator WiFi Setting 1: Search your WiFi SSID 2: Choose your WiFi SSID 3: Input your WiFi password, and make sure it is correct. 4: Save www.wansview.com...
-
Page 52: System Settings
Local Recording Check local recorded files or playback the local recorded video. 1/4/9 Windows Full screen Color Adjust: 6.4.5 Camera Log The user can get online information of the device through a camera log query, such as alarm information etc. www.wansview.com... -
Page 53: Faq
Click Compatibility View Setting >Add> Close. 7.2 Plugin Issues Question: I’ve already installed a Plug-in for the browser, but the live stream shows messy code like the image below: www.wansview.com... -
Page 54: Install Ie Tab For Chrome 43
Due to the fact that Chrome43 and higher no longer support NPAPI plug-in, IE tab is need to be installed for Chrome. Here is how to install an IE tab for Chrome: 1. Visit https://chrome.google.com/webstore/search/IE%20tab.hl=en to go to the Chrome web store to download and install an IE tab. www.wansview.com... -
Page 55: Install Ie Tab For Firefox 42
Due to the fact that Firefox 42 and higher no longer support NPAPI plug-in, IE tab is need to be installed for Firefox. Here is how to install an IE Tab for Firefox: 1. Please visit to download the IE Tab for Firefox. https://addons.mozilla.org/en-US/firefox/addon/ie-tab/ www.wansview.com... -
Page 56: Port Forwarding
1. One router connected (only one router used, and the router is directly connected to the WAN) Log on the router, find the Port forwarding (or Port Mapping or Virtual Server), then add camera’s local IP and Port as in the figure below: www.wansview.com... - Page 57 First, please log on to router 2, find port forwarding, then add the camera’s IP and port. Second, please log on to router 1, find port forwarding, then add the Router 1 IP and camera’s Port number. Note: Because each brand of router is different, port forwarding methods may be www.wansview.com...
-
Page 58: Warranty
Technical Support We hope your Wansview IP Camera is enjoyable and easy to set up and use. You may have some additional questions or concerns that are not clarified in this user manual. Note: This user manual is for reference . - Page 59 When contacting us, please have the following information handy for fast and quick processing: Model name: App name: Your problem(Attach picture to show your problem if necessary): Thanks very much. www.wansview.com...