Centralization Control Software - Wansview NCH--530W User Manual

http://www.wansview.com
In the Windows OS, using browser with IE kernel, user must download the Active-x. Please
Download "QuickTime" plug-in and install it before you use Safari, Firefox to access the IP
camera. (We suggest QuickTime 7.6) After installation, users can start the QuickTime
program, and to access the QuickTime Preferences dialog box from Edit Menu. Click
Advanced, select "custom." in the Transport Setup. It pops up the Streaming Transport
dialog box. Please select "HTTP" for transport protocol and "80" as port ID, and then click
"ok". Please be back to Transport Setup to change "Custom.." to "Auto". Finally, click "ok"
at the bottom. Please refer to the above Figure 30. Safari for example, you can find the
player interface as the below Figure 31.
Figure 31

6.2 Centralization Control Software

IPCMonitor is a free software offered by factory, several devices on LAN and WAN can
be browsed at the same time. The software also support snap, video record and so on.
The below Figure 32 is the interface.
22