Sd/Tf Record Playback; Alarm Setting - Wansview Pro HD User Manual

3.4.2 SD/TF Record Playback

3.4.3 Alarm Setting

Alarm Deployment
IO Detection：Sensor type can choose Always open or Always close. When using IO Check, user should enable IO detection,
Always open means external alarm device is needed, and only with alarm trigger, alarm will be valid. If choose Always close, the
camera will be alarm continuously per 30 second.
Motion Detection: Sensitivity can choose Low/ Middle/ High according to needs.
Voice Detection: Sensitivity can choose Low/ Middle/ High according to needs.
Temperature detection: the temperature range can be set from
"<"means the temperature below the set value, the camera will send alarm notification.
">"Means the temperature above the set value, the camera will send alarm notification.
Humidity detection: the humidity range can be set from 0% to 100%.
"<"means the humidity below the set value, the camera will send alarm notification.
">"Means the humidity above the set value, the camera will send alarm notification.
Trigger Alone : The alarm will be triggered for any kind of alarm condition.
Trigger Linkage: If set two or more kinds of alarm methods, only met all alarm conditions, the alarm can be triggered.
Support Email/ Skype: service2@wansview.com
Enter SD/TF Record Playback, record
file will be automatically displayed.
User can also search needed files by
clicking
check schedule or alarm record on an
exact date.
Notice：The date in red means there are
recorded files on that day.
-100℃ to 100℃
icon to enter calendar to
Access to "Alarm Setting", there are
options for Alarm Deployment and
Alarm action.
17