Alarm Settings; Motion Detect - Wansview NCB521W User Manual

http://www.wansview.com
User needs to apply for a MSN account for this device first, for example:
test1@hotmail.com. Please put this MSN account and its password as above Figure 15.
Then put your MSN account, for example: friend1@hotmail.com, into the 'MSN Friends
List. Then on your friend1@hotmail.com MSN list, you can see test1@hotmail.com is
online. You just send "url?" to test1@hotmail.com and you will get the WAN ip address of
this ip camera. But please make sure test1@hotmail.com and friend1@hotmail.com
should be MSN friends before you do the settings.

5.2 Alarm Settings

5.2.1 Motion Detect

1） Motion Detect
Figure 21 Operation detection set sample
User can select the motion detection. If there is any motion, it will detect the motion and
trigger the alarm.
Sensitivity：in the motion detect sensibility, the larger the figure, the more sensitive.
Alarm Duration：After trigger the alarm, external alarm device sustains alarm duration
time;
2） Scheduler
Device will trigger alarm in scheduled time. User can set schedule time to be "Select All".
Before you set "Schedule", please go to Date and Time settings to set the correct time for
the item, as shown in figure 21.
17