Wansview NCH--530W User Manual page 8

http://www.wansview.com
(F4)". Then you may view the ip camera, like figure 5.
NOTE:
1) If you don't know how to fill out the content of "IP config", you could also tick the "Set
IP automatically" to get the IP address from the router automatically.
2) If you have the firewall software in your PC, when you run the HSearch_en.exe, it
may pop up a window to say "whether you want to block this program or not", then
you should choose not to block.
3) The default ip address is 192.168.0.158 and default http port is 80.
Figure 4
Figure 5
8