Alarm Setting - Wansview K2 User Manual

2.5 Alarm Setting

The camera is mostly for live video, what we achieve is to make the video more clear and
easy set up. it is not a professional security camera, the motion detection is only an add-
on feature. So the alarm notification will not be very accurate.
But if you want the motion detection works accurately, you may connect the camera to
some professional security software like: Blue Iris, iSpy or Sighthound, the camera
alert works great on them.
Follow the below steps to set up alarm.
Alarm Deployment
IO Detection: this is for camera that can connect external source of alert device. The
K2/K3 is not available.
Sensor Type: For external source of alert device. The external sensor can be always
open or always close.
Motion Detection: Enable Motion Detection, user can set up camera with motion alarm
Motion Detection Sensitivity: User can choose Low/Middle/High sensitivity according
to needs.
Voice Detection: Enable Voice Detection, user can set up camera with voice alarm
Voice Detection Sensitivity: User can choose Low/Middle/High sensitivity according
to needs.
Trigger Alone: The alarm will be triggered for any kind of active
alarm event(Motion/Voice/IO)
Trigger Link: The alarm will be triggered for multiple detection at the
same time(Motion/Voice/IO).
Alarm Action:
Save Picture to Email: When an alarm is detected, the camera will send pictures to
the email box. Users can set up to 2 recipients.
Click Mail Setting to setup the email. Check your email provider for SMTP Server
and Port.
www.wansview.com 18