Supero SUPERSERVER 5017R-WRF User Manual page 90

S S
UPER ERVER 5017R-WRF User's Manual
Enable iSCSI
Select Enabled to enable iSCSI support. The options are Disabled and Enabled.
Enable DHCP
Select Enabled to enable Dynamic Host Confi guration Protocol (DHCP) support,
which will allow the BIOS to search for a DHCP server in the network to fi nd the
available IP address for this computer. The options are Disabled and Enabled.
If set to disabled, the following items will be displayed:
•
Initiator IP Address
•
Initiator Subnet Mask
•
Gateway
Target Name
•
Target IP Address
•
Target Port
•
Boot LUN
CHAP Type
Use this item to select CHAP type. The options are None, One Way, and Mutual.
If the item 'Enable DHCP' is set to Enabled, the following items will be displayed:
Get Target Information via DHCP
Select Enabled to get target information via DHCP. The options are Disabled
and Enabled.
•
Target Name
•
Target IP Address
•
Target Port
•
Boot LUN

Save Changes
Select this item and press <Enter> to save the changes.

Back to Previous Page
Select this item and press <Enter> to return to the previous page.
7-20