Table of Contents
Advertisement
S
S
UPER
ERVER 5017R-WRF User's Manual
Rear Unit ID LED
The rear Unit ID LED (LE2) is located
on the back panel. This LED is used
in conjunction with the rear UID switch
to provide easy identifi cation of a sys-
tem that might be in need of service.
Onboard Standby Power LED
An onboard Standby Power LED
(LED2) indicates that the AC power
cable is connected and the power
supply switch is on. Make sure to
disconnect the power cable before
removing or installing non hot-swap
components.
5-11 SATA Ports
SATA Ports
The X9SRW-F includes a total of 10
SATA ports. I-SATA0 ~ 5 on the moth-
erboard includes two SATA 3.0 ports
(I-SATA0 and I-SATA1, which have
white connector). An additional SATA
controller provides four more SATA
2.0 ports (S-SATA1 ~ 4).
LED Indicator
Status
Solid Blue
Onboard Standby Power
LED Indicator
Status
Defi nition
Off
Power Supply is Off (Hard
Switch)
On
Power Supply is On (Hard
Switch).
SATA Port Pin Defi nitions
Pin #
Defi nition
1
Ground
2
TXP
3
TXN
4
Ground
5
RXN
6
RXP
7
Ground
5-26
Rear UID
Defi nition
UID Toggled On
Advertisement
Table of Contents
