Supero SUPERSERVER 5017R-WRF User Manual page 102

S S
UPER ERVER 5017R-WRF User's Manual
Boot Confi guration
Setup Prompt Timeout
This item allows the user to specify the number of seconds the system should wait
before the setup is initiated. The default setting is 1.
Boot NumLock State
Use this feature to set the Power-on state for the Numlock key. The options are
Off and On.
Quiet Boot
Set this value to allow the bootup screen options to be modifi ed between POST
messages or the OEM logo. Select Disabled to allow the computer system to display
the POST messages. Select Enabled to allow the computer system to display the
OEM logo. The default setting is Disabled.
CSM16 Module Version: This item displays the version of the CSM16 Module.
GateA20 Active
Select Always to keep Gate 20 enabled all the time, which will be benefi cial when
RT (Real Time) code is executed above 1 MB. The options are Upon Request
and Always.
Option ROM Messages
This item allows the user to decide how the Option ROM Message is displayed.
Select Keep Current to use the current Option ROM Message Display setting. Select
Force BIOS to use the Option ROM display mode set by the system BIOS. The
options are Force BIOS and Keep Current.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this
item is set to Enabled, the ROM BIOS of the host adaptors will "capture" Interrupt
19 at boot and allow the drives that are attached to these host adaptors to function
as bootable disks. If this item is set to Disabled, the ROM BIOS of the host adap-
tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are Enabled and Disabled.
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive
for more than 5 minutes. The options are Enabled and Disabled.
7-32