Table of Contents
Advertisement
2-1
Overview
This chapter provides a quick setup checklist to get your SuperServer 5017R-WRF
up and running. Following these steps in the order given should enable you to have
the system operational within a minimum amount of time.
This quick setup assumes that your system has come to you with the processors
and memory preinstalled. If your system is not already fully integrated with a moth-
erboard, processors, system memory etc., please turn to the chapter or section
noted in each step for details on installing specifi c components.
2-2
Unpacking the System
You should inspect the box the SuperServer 5017R-WRF was shipped in and note
if it was damaged in any way. If the server itself shows damage you should fi le a
damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the 5017R-WRF. It
should be situated in a clean, dust-free area that is well ventilated. Avoid areas
where heat, electrical noise and electromagnetic fi elds are generated. You will also
need it placed near a grounded power outlet. Be sure to read the Rack and Server
Precautions in the next section.
2-3
Preparing for Setup
The box the SuperServer 5017R-WRF was shipped in should include two sets of rail
assemblies, two rail mounting brackets and the mounting screws you will need to
install the system into the rack. Follow the steps in the order given to complete the
installation process in a minimum amount of time. Please read this section in its en-
tirety before you begin the installation procedure outlined in the sections that follow.
Choosing a Setup Location
Chapter 2
Server Installation
2-1
Chapter 2: Server Installation
Advertisement
Table of Contents
