Supero SUPERSERVER 5017R-WRF User Manual page 100

S S
UPER ERVER 5017R-WRF User's Manual
Erasing Settings
Erase SEL
Select 'Yes, On next reset' to erase all system event logs upon next system
reboot. Select 'Yes, On every reset' to erase all system event logs upon each
system reboot. Select No to keep all system event logs after each system reboot.
The options are No, Yes, On next reset, and Yes, On every reset.
When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when
the system event log is full. The options are Do Nothing and Erase Immediately.
Cstom EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are Disabled, Both, Error code, and
Progress code.
Note: After making changes on a setting, be sure to reboot the system for the
changes to take effect.

BMC Network Confi guration
LAN Channel 1/LAN Channel 2: This feature allows th user to confi gure the
settings for LAN Channel 1 or LAN Channel 2.
Update IPMI LAN Confi guration
This feature allows the user to decide if the BIOS should confi gure the IPMI
setting at next system boot. The options are No and Yes. If the option is set
to Yes, the user is allowed to confi gure the IPMI settings at next system boot:
Confi guration Address Source
This feature allows the user to select the source of the IP address for this com-
puter. If Static is selected, you will need to know the IP address of this computer
and enter it to the system manually in the fi eld. If Unspecifi ed is selected, the
BIOS will search the next available IP address for this computer without modify-
ing BMC network parameters. The options for LAN Channel 1 are Static and
Dynamic-Obtained by BMC. The options for LAN Channel 2 are Unspecifi ed,
Static, Dynamic-Obtained by BMC, Dynamic-Loaded by BIOS, and Dynamic-
BMC Running Other Protocol. If Unspecifi ed is selected, the following items are
assigned IP addresses automatically.
7-30