Supero SUPERSERVER 5017R-WRF User Manual page 54

S S
UPER ERVER 5017R-WRF User's Manual
BIOS Recovery
The BIOS Recovery (JP3) is used to
enable or disable the BIOS Recovery
feature of the motherboard. Install
the jumper on pins 1-2 to begin the
recovery process.
ME Recovery
ME Recovery (JPME1) is used to en-
able or disable the ME Recovery fea-
ture of the motherboard. This jumper
will reset Intel ME values back to their
default settings.
VRM SMB Clock/Data
The VRM SMB Clock/Data is used
to select where the Voltage Regula-
tor Module's System Management
Bus clock signal (J29) or Data (J30)
is directed to. Select between BMC
or PCH.
BIOS Recovery
Pin Defi nitions
Pin# Defi nition
1 Recover
2 Ground
3 Normal (Default)
ME Recovery
Pin Defi nitions
Pin# Defi nition
1 Normal (Default)
2 Ground
3 Force Update
VRM SMB Clock/Data
Pin Defi nitions
Pin# Defi nition
1 BMC (Default)
2 SMBCLK / SMBDAT
3 PCH
5-24