Trusted Host Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
DoS Log State This option is used to enable or disable the DoS prevention log state.
Click the Apply button to accept the changes made.
After clicking the View Detail link next to the DoS Type displays, the following window will appear:
Figure 8-83 DoS Attack Prevention Detail window
Click the <<Back button to return to the previous page.

Trusted Host Settings

Up to thirty trusted host secure IP addresses or ranges may be configured and used for remote Switch management. It
should be noted that if one or more trusted hosts are enabled, the Switch will immediately accept remote instructions
from only the specified IP address or addresses. If you enable this feature, be sure to first enter the IP address of the
station you are currently using.
To view this window, click Security > Trusted Host Settings as shown below:
356