Dhcp Snooping Entry - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
Maximum Entry (1-50)
Maximum IPv6 Entry
(1-50)
Click the Apply button to accept the changes made.

DHCP Snooping Entry

This window is used to view dynamic entries on specific ports.
To view this window, click Security > IP-MAC-Port Binding (IMPB) > DHCP Snooping > DHCP Snooping Entry as
shown below:
The fields that can be configured are described below:
Parameter
Figure 8-29 DHCP Snooping Max Entry Settings window
Description
Select the unit you wish to configure.
Use the drop-down menus to select a range of ports to use.
Enter the maximum entry value. Tick the No Limit check box to have unlimited
maximum number of the learned entries.
Enter the maximum entry value for IPv6 DHCP Snooping. Tick the No Limit check box
to have unlimited maximum number of the learned entries.
Figure 8-30 DHCP Snooping Entry window
Description
299