Authentication Server Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Group Name
Click the Add button to add a new entry based on the information entered.
Click the Edit button (or the Edit Server Group tab) to re-configure the specific entry.
Click the Edit Server Group tab to see the following window.
Figure 8-70 Authentication Server Group Settings – Edit Server Group window
The fields that can be configured are described below:
Parameter
Group Name
IP Address
Protocol
Click the Add button to add a new entry based on the information entered.
NOTE: The user must configure Authentication Server Hosts using the Authentication Server Hosts
window before adding hosts to the list. Authentication Server Hosts must be configured for their
specific protocol on a remote centralized server before this function can work properly.
NOTE: The three built-in server groups can only have server hosts running the same TACACS daemon.
TACACS/XTACACS/TACACS+ protocols are separate entities and are not compatible with each
other.

Authentication Server Settings

User-defined Authentication Server Hosts for the TACACS / XTACACS / TACACS+ / RADIUS security protocols can
be set on the Switch. When a user attempts to access the Switch with Authentication Policy enabled, the Switch will
Enter a new server group name.
Description
Enter a server group name.
Enter the IP address of the server host.
use the drop-down menu to choose the Protocol associated with the IP address of the
Authentication Server Host
341