Appendix C - Trap Entries - D-Link xStack DGS-3420 Series Reference Manual

Xstack dgs-3420 series layer 2 managed stackable gigabit switch web ui reference guide
Hide thumbs Also See for xStack DGS-3420 Series:
Table of Contents

Advertisement

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide

Appendix C - Trap Entries

This table lists the trap logs found on the Switch.
Category
Trap Name
MAC-based Access
SwMacBasedAccessControlLoggedSuc
Control
cess
SwMacBasedAccessControlLoggedFail The trap is sent when a MAC-based Access
SwMacBasedAccessControlAgesOut
LLDP
lldpRemTablesChange
LLDP-MED
lldpXMedTopologyChangeDetected
802.3ah OAM
dot3OamThresholdEvent
dot3OamNonThresholdEvent
Upload/Download
agentFirmwareUpgrade
Description
The trap is sent when a MAC-based Access
Control host is successfully logged in.
Binding objects:
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
Control host login fails.
Binding objects:
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
The trap is sent when a MAC-based Access
Control host ages out.
Binding objects:
(1) swMacBasedAuthInfoMacIndex
(2) swMacBasedAuthInfoPortIndex
(3) swMacBasedAuthVID
A lldpRemTablesChange notification is sent when
the value of lldpStatsRemTableLastChangeTime
changes.
Binding objects:
(1) lldpStatsRemTablesInserts
(2) lldpStatsRemTablesDeletes
(3) lldpStatsRemTablesDrops
(4) lldpStatsRemTablesAgeouts
A notification generated by the local device
sensing a change in the topology that indicates
that a new remote device attached to a local port,
or a remote device disconnected or moved from
one port to another.
Binding objects:
(1) lldpRemChassisIdSubtype
(2) lldpRemChassisId
(3) lldpXMedRemDeviceClass
This notification is sent when a local or remote
threshold crossing event is detected.
Binding objects:
(1).dot3OamEventLogTimestamp
(2).dot3OamEventLogOui
(3).dot3OamEventLogType
(4).dot3OamEventLogLocation
(5).dot3OamEventLogWindowHi
(6).dot3OamEventLogWindowLo
(7).dot3OamEventLogThresholdHi
(8).dot3OamEventLogThresholdLo
(9).dot3OamEventLogValue
(10).dot3OamEventLogRunningTotal
(11).dot3OamEventLogEventTotal
This notification is sent when a local or remote
non-threshold crossing event is detected.
Binding objects:
(1).dot3OamEventLogTimestamp
(2).dot3OamEventLogOui
(3).dot3OamEventLogType
(4).dot3OamEventLogLocation
(5).dot3OamEventLogEventTotal
This trap is sent when the process of upgrading
the firmware via SNMP has finished.
Binding objects:
484
OID
1.3.6.1.4.1.171.12.35.11.1.0
.1
1.3.6.1.4.1.171.12.35.11.1.0
.2
1.3.6.1.4.1.171.12.35.11.1.0
.3
1.0.8802.1.1.2.0.0.1
1.0.8808.1.1.2.1.5.4795.0.1
1.3.6.1.2.1.158.0.1
1.3.6.1.2.1.158.0.2
1.3.6.1.4.1.171.12.1.7.2.0.7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dgs-3420-28sc

Table of Contents