Upload Configuration To Rcp - D-Link xStack DGS-3420 Series Reference Manual
Xstack dgs-3420 series layer 2 managed stackable gigabit switch web ui reference guide
Hide thumbs
Also See for xStack DGS-3420 Series:
- Reference manual (1117 pages) ,
- Hardware installation manual (53 pages) ,
- How to set up (2 pages)
Table of Contents
Advertisement
xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
TFTP Server IP
Source File
Destination File
Filter
Click Upload to initiate the upload.
Upload Configuration to RCP
This window allows the user to upload the configuration file from the Switch to a RCP Server.
Figure 12-14 Upload Configuration File to TFTP window
Description
Use the drop-down menu to select a unit for uploading the configuration file.
Enter the TFTP server IP address used.
IPv4
Click the radio button to enter the TFTP server IP address used.
IPv6
Click the radio button to enter the TFTP server IPv6 address used.
Domain Name
Click the radio button to enter the domain name.
Enter the location and name of the Source File.
Enter the location and name of the Destination File.
Use the drop-down menu to Include, Exclude or Begin a filter like SNMP, VLAN or STP.
Select the appropriate Filter action and enter the service name in the space provided.
Figure 12-15 Upload Configuration to RCP window
449
Advertisement
Table of Contents
