Ip Multicast Vlan Replication Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Global State
TTL
Source MAC
Address
Click the Apply button to accept the changes made.

IP Multicast VLAN Replication Settings

On this page the user can add and view the IP multicast VLAN replication table.
To view the following window, click L2 Features > L2 Multicast Control > IP Multicast VLAN Replication > IP
Multicast VLAN Replication Settings, as show below:
The fields that can be configured are described below:
Parameter
Entry Name
Click the Add button to add a new entry based on the information entered.
Click the Find by Hardware the find an entry based on the hardware.
Click the View All button to display all the existing entries.
Click the Edit button under Source to re-configure the specific entry.
Click the Edit button under Destination to re-configure the specific entry.
Click the Delete button to remove the specific entry.
After clicking the Edit button under Source, the following page will appear:
Here the user can enable or disable the global state feature.
Here the user can select to decrease or no decrease the Time to live (TTL) value in the
packets.
Here the user can select to replace or not to replace the Source MAC Address of the
packet.
Figure 4-92 IP Multicast VLAN Replication Settings window
Description
Here the user can enter a Multicast VLAN Replication entry name.
155