D-Link xStack DGS-3420 Series Reference Manual page 161

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
State
Replace Source IP
Remap Priority
Replace Priority
Unit
Untagged Member Ports
Tagged Member Ports
Untagged Source Ports
Tagged Source Ports
Click the Select All button to select all the ports for configuration.
Click the Clear All button to unselect all the ports for configuration.
Click the Apply button to accept the changes made.
Click the <<Back button to discard the changes made and return to the previous page.
After clicking the Profile List
The fields that can be configured or displayed are described below:
Parameter
VID
VLAN Name
Profile Name
Description
Use the drop-down menu to enable or disable the state.
With the IGMP snooping function, the IGMP report packet sent by the host will be
forwarded to the source port. Before forwarding of the packet, the source IP address
in the join packet needs to be replaced by this IP address. If none is specified, the
source IP address will use zero IP address.
0-7 – The remap priority value (0 to 7) to be associated with the data traffic to be
forwarded on the multicast VLAN.
None – If None is specified, the packet's original priority is used. The default setting
is None.
Specify that the packet's priority will be changed by the switch, based on the remap
priority. This flag will only take effect when the remap priority is set.
Select the unit you wish to configure.
Specify the untagged member port of the multicast VLAN.
Specify the tagged member port of the multicast VLAN.
Specify the untagged source port where the multicast traffic is entering the Switch.
The PVID of the untagged source port is automatically changed to the multicast
VLAN. Source ports must be either tagged or untagged for any single multicast
VLAN, i.e. both types cannot be members of the same multicast VLAN.
Specify the source port or range of source ports as tagged members of the multicast
VLAN.
link, the following page will appear:
Figure 4-85 IGMP Snooping Multicast VLAN Group List Settings window
Description
Display the VLAN ID.
Display the VLAN name.
Use the drop-down menu to select the IGMP Snooping Multicast VLAN Group Profile name.
150