Appendix B - System Log Entries - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide

Appendix B - System Log Entries

The following table lists all possible entries and their corresponding meanings that will appear in the System Log of this
Switch.
Category Log Description
MAC-based
Event description: A host failed to pass the authentication
Access Control
Log Message: MAC-based Access Control unauthenticated host (MAC:
<macaddr>, Port <[unitID:]portNum>, VID: <vid>)
Parameters description:
macaddr: MAC address
unitID: The unit ID.
portNum: The port number.
vid: VLAN ID on which the host exists
Event description: The authorized user number on a port has reached the
maximum user limit.
Log Message: Port < [unitID:]portNum> enters MAC-based Access Control
stop learning state.
Parameters description:
unitID: The unit ID.
portNum: The port number.
Event description: The authorized user number on a port is below the
maximum user limit in a time interval (interval is project dependent).
Log Message: Port <[unitID:]portNum> recovers from MAC-based Access
Control stop learning state.
Parameters description:
unitID: The unit ID.
portNum: The port number.
Event description: The authorized user number on the whole device has
reached the maximum user limit.
Log Message: MAC-based Access Control enters stop learning state.
Parameters description:
None
Event description: The authorized user number on the whole device is below
the maximum user limit in a time interval (interval is project dependent).
Log Message: MAC-based Access Control recovers from stop learning state.
Parameters description:
None
Event description: A host has passed the authentication.
Log Message: MAC-based Access Control host login successful (MAC:
<macaddr>, port: <[unitID]portNum>, VID: <vid>)
Parameters description:
macaddr: The MAC address.
unitID: The unit ID.
portNum: The port number.
Severity
Critical
Warning
Warning
Warning
Warning
Informational
455
Note