Voice Vlan Port Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Voice VLAN State
Voice VLAN Name
Voice VID (1-4094)
Priority
Aging Time (1-65535)
Log State
Click the Apply button to accept the changes made for each individual section.

Voice VLAN Port Settings

This window is used to show the ports voice VLAN information.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Port Settings, as show below:
Figure 4-19 Voice VLAN Global Settings window
Description
The state of the voice VLAN.
The name of the voice VLAN.
The VLAN ID of the voice VLAN.
The priority of the voice VLAN, the range is 0 – 7. The default priority is 5.
The aging time to set, the range is 1 – 65535 minutes. The default value is 720 minutes.
The aging time is used to remove a port from voice VLAN if the port is an automatic
VLAN member. When the last voice device stops sending traffic and the MAC address of
this voice device is aged out, the voice VLAN aging timer will be started. The port will be
removed from the voice VLAN after expiration of voice VLAN aging timer. If the voice
traffic resumes during the aging time, the aging timer will be reset and stop.
Used to enable/disable sending of issue of voice VLAN log.
96