Flash File System Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Interface Name
Server IP Address
Click the Add button to add a new entry based on the information entered.
Click the Find button to locate a specific entry based on the information entered.
Click the View All button to display all the existing entries.
Click the View Detail link to view more information regarding the specific entry.
After clicking in the View Detail
Click the Delete button to remove the specific entry.
Click the <<Back button to return to the previous page.

Flash File System Settings

Why use flash file system:
In old switch system, the firmware, configuration and log information are saved in a flash with fixed addresses and size.
This means that the maximum configuration file can only be 2Mb, and even if the current configuration is only 40Kb, it
will still take up 2Mb of flash storage space. The configuration file number and firmware numbers are also fixed. A
compatible issue will occur in the event that the configuration file or firmware size exceeds the originally designed size.
Flash File System in our system:
The Flash File System is used to provide the user with flexible file operation on the Flash. All the firmware,
configuration information and system log information are stored in the Flash as files. This means that the Flash space
taken up by all the files are not fixed, it is the real file size. If the Flash space is enough, the user could download more
configuration files or firmware files and use commands to display Flash file information, rename file names, and delete
it. Furthermore, the user can also configure the boot up runtime image or the running configuration file if needed.
In case the file system gets corrupted, Z-modem can be used to download the backup files directly to the system.
To view this window, click Network Application > Flash File System Settings as shown below:
Figure 9-43 UDP Helper Server Settings window
Description
Enter the IP interface name used here. This name can be up to 12 characters long.
Enter the UDP Helper Server IP address here.
link, the following window will appear:
Figure 9-44 UDP Helper Server Settings window (View Detail)
393