Inspecting The Fuses - Yamaha TZR50 '03 Service Manual

INSPECTING THE FUSES

INSPECTING THE FUSES
1. Remove:
• The seat
2. Remove:
• The fuse
3. Inspect:
• The fuse
Stages in inspection
• Connect the pocket tester to the fuse and
check if the continuity is correct.
NOTE:
Place the tester selector in position "Ω X 1"
• If the tester indicates ∞ the fuse will have
blown - change this.
4. Replace:
• The blown fuse
s WARNING
s
Do not use fuses with a higher amperage
than the value specified.
Installing a fuse with the wrong amperage
could cause damage to the electrical sys-
tem and even fires.
3-36
INSP
ADJ
Pocket tester:
90890 - 03112