Yamaha TZR50 '03 Service Manual page 165

FRONT BRAKE
7. Fill up:
• Brake liquid
Recommended brake liquid:
DOT nº 4
CAUTION
The brake liquid could erode painted surfa-
ces and plastic parts. Always clean any
liquid spilt.
s WARNING
s
• Use only brake liquid of the specified qua-
lity: otherwise the rubber seals could
deteriorate and give rise to leaks and
reduction of the braking efficiency.
• Always fill up with brake liquid of the
same type: mixing liquids could give rise
to harmful chemical reactions and reduce
efficiency.
• Take care that water does not get into the
master cylinder when filling up. Water
considerably reduces the boiling tempe-
rature of the liquid and could give rise to
obstruction through bubbles.
8. Assemble:
• The rubber seal
• The pump cover
Screw (pump cover):
0.2 kg • m
9. Bleed:
• The air
See the section on "BLEEDING THE
AIR" in CHAPTER 3.
7-19
CHAS