Adjusting The Steering - Yamaha TZR50 '03 Service Manual

LUBRICATING THE DRIVE CHAIN /

ADJUSTING THE STEERING

3-27
LUBRICATING THE DRIVE CHAIN
The chain consists of a large number of parts
that work in constant contact with each other.
If it does not get proper maintenance it will
wear quickly. This is why one should acquire
the habit of checking the chain regularly.
These checks are particularly necessary when
driving through dusty areas.
1. Use a chain lubricant in aerosol form. First
remove any dirt and mud from the chain
with a brush or cloth; then spray the lubri-
cant between both rows of side plates,
above all the central rollers.
2. To clean the chain, take this off the machi-
ne, submerge it in solvent and get rid of all
the dirt possible. Take the chain out of the
solvent and dry it. Immediately lubricate
this to prevent it from rusting.
Recommended lubricant:
SAE 10W30 SE type
ADJUSTING THE STEERING
Inspecting the steering head
s WARNING
s
Stand the motorcycle in a safe place to
avoid any danger of it falling over
1. Lift the front wheel, placing a suitable sup-
port under the engine.
2. Check:
• The bearings of the steering assembly.
Twist grip the ends of the fork arms and
gently rock the assembly forwards and
backwards.
Play Adjust the steering head
INSP
ADJ