Adjusting The Autolube Pump Cable - Yamaha TZR50 '03 Service Manual

ADJUSTING THE AUTOLUBE PUMP CABLE

ADJUSTING THE AUTOLUBE PUMP
CABLE
NOTE:
Before adjusting the automatic mixture pump
cable, you must first adjust the free play of the
throttle cable.
1. Remove:
• Cowlings
See the section on "FAIRING", "DISMAN-
TLING"
• The oil pump cover
2. Adjust:
• The throttle cable
3. Check:
• The free play while keeping the throttle in
the idle position.
This is not adjusted
cable
4. Adjust:
• The pump cable
Stages in the Adjustment:
• Loosen the locknut
• Tighten or loosen the tensor
getting the minimum play in operation
• Tighten the locknut
5. Check:
• Adjust the cable of the lubrication pump
3-4
INSP
ADJ
Adjust the pump
until