Yamaha TZR50 '03 Service Manual page 174

FRONT FORK
INSTALLING
Use the "EXTRACTION" procedure inversely.
Take into account the following points.
1. Install:
• The fork
Provisionally tighten the clamp screws of
the handlebars.
NOTE:
Maintain the inner tube.
2. Tighten:
• The (handlebar) clamp screws
• The clamp screws (upper shank of the
handlebar)
(Handlebar) clamp screws:
2.0 kg • m
Clamp screws (upper shank of the
handlebar):
2.0 kg • m
3. Tighten:
• The clamp screw (lower shank)
Clamp screw (lower shank):
3.0 kg • m
4. Install:
• The front mudguard
Screws (front mudguard):
0.8 kg • m
5. Install:
• The front wheel
See the section on "FRONT WHEEL -
FITTING"
Wheel axle:
7.4 kg • m
Screws (brake caliper):
3.5 kg • m
7-28
CHAS