Replacing The Fuses - Yamaha AG200FEM 2021 Owner's Manual

Replacing the fuses

The main fuse is located behind panel
A. (See page 7-7.)
2
1
1. Main fuse
2. Spare main fuse
The auxiliary DC jack fuse is located
behind panel B. (See page 7-7.)
Periodic maintenance and adjustment
EAU23563
1
1. Auxiliary DC jack fuse
2. Spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to "OFF" and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
Specified fuses:
Main fuse:
20.0 A
Auxiliary DC jack fuse:
10.0 A
2
[EWA15132]
7-29
3. Turn the key to "ON" and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
1
2
3
4
5
6
7
8
9
10
11
12