Assembly - Yamaha TZR50 '03 Service Manual

FRONT WHEEL
INSTALLING
Repeat the dismantling procedure, inversely.
Take into account the following points:
1. Apply:
• Lithium grease
Lightly grease the oil seal and the gea-
ring unit
2. Assemble:
• The speedometer sensor.
NOTE:
Make sure that the projections on the insi-
de of the sensor coincide with the flat sides
of the wheel hub.
3. Assemble:
• The front wheel assembly
NOTE:
Make sure that the projection of the fork
cylinder fits in correctly with the sensor
positioning slot.
4. Tighten:
• The wheel axle
• The pressure bolt
• The screws (brake caliper)
Wheel axle:
6.5 m • kg
Pressure bolt:
2.3 km • kg
Screws (brake caliper):
3.5 m • kg
7-5
CHAS