Assembly - Yamaha TZR50 '03 Service Manual

REAR WHEEL
2. Measure:
• The run out of the wheel
See the section on "FRONT WHEEL -
INSPECTION"
3. Check:
• The wheel bearings
• The wheel balancing
See the section on "FRONT WHEEL -
INSPECTION"
• The brake disc
See the section "FRONT WHEEL - INS-
PECTION"

ASSEMBLY

Apply the same procedure as for dismantling
but inversely.
Take into account the following points:
1. Apply:
• Lithium grease
Apply the grease lightly to the lips of the
oil seal
2. Adjust:
• The transmission chain tension with the
rear wheel resting on the ground
Transmission chain tension:
20 ~ 25 mm
• See the section on "TIGHTENING THE
TRANSMISSION CHAIN" in CHAPTER
3.
3. Tighten:
• The axle nut
• The locknut (wheel axle)
Nut (wheel axle)
9.0 m • kg
Screws (brake caliper):
3.0 m • kg
7-8
CHAS