Yamaha TZR50 '03 Service Manual page 70

CHANGING THE FORK OIL
7. After removing most of the oil, pump up
and down with the fork to get any remai-
ning oil out.
8. Inspect:
• The O ring (plug)
Damages
9. Fill up with:
• Fork oil
10. After filling this, pump the fork up and
down slowly, to distribute the oil.
11. Install:
• The plug
• The circlip
s WARNING
s
Always use a new circlip
12. Tighten:
• The clamp screw (upper and lower stee-
ring shank)
3-30
INSP
ADJ
Replace
Oil capacity of the front fork (each
arm):
3
235 cm
Recommended oil:
10W fork oil or equivalent
Clamp screw (upper steering
shank):
2.2 kg • m