Replacing The Fuses - Yamaha MT-10 2023 Owner's Manual

Periodic maintenance and adjustment
battery tends to discharge more quickly
1
if the vehicle is equipped with optional
electrical accessories.
2
NOTICE
3
To charge a VRLA (Valve Regulated
Lead Acid) battery, a special (con-
4
stant-voltage) battery charger is re-
quired. Using a conventional battery
charger will damage the battery.
5
6
To store the battery
1. If the vehicle will not be used for
7
more than one month, remove the
battery, fully charge it, and then
8 place it in a cool, dry place.
NOTICE: When removing the
battery, be sure to turn the main
9
switch off, then disconnect the
negative lead before discon-
10
necting the positive lead.
2. If the battery will be stored for more
11
than two months, check it at least
once a month and fully charge it if
12
necessary.
3. Fully charge the battery before in-
13
stallation. NOTICE: When install-
ing the battery, be sure to turn
the main switch off, then con-
nect the positive lead before
connecting
lead.
ECA16522
[ECA16842]
4. After installation, make sure that
the battery leads are properly con-
nected to the battery terminals.
NOTICE
Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.
[ECA16304]

Replacing the fuses

The main fuse, ABS motor fuse, and
the negative
fuse boxes containing individual circuit
fuses are all located under the seat.
TIP
Remove the starter relay cover by pull-
ECA16531
ing it upward.
1. Starter relay cover
2. ABS motor spare fuse
3. ABS motor fuse
4. Main fuse
8-31
2 2
3 3
1 1
EAU94164
4 4 4