ASSEMBLING AND ADJUSTING THE ENGINE
7. Install:
• Clutch discs
• Friction discs
• Push rod nº 1
• Pressure plate
• Washer
• Nut
• Clutch springs
• Screws for securing the clutch spring
NOTE:
• Install the clutch discs and the friction discs
alternately in the clutch boss starting and
ending with a friction disc
• Install the clutch discs so that each of these
is 120º offset with the previous one.
NOTE:
Line up the engraved mark
boss with the arrow
plate.
Clutch spring securing screw:
0.4 m • kg
4-34
ENG
of the clutch
of the clutch pressure